PRO Z17 Lens Interchange Instructions

Lens Removal

The PRO Z17 Safety frame uses a locking pin to secure the center of the lens. To release the pin, you must apply a gentle pressure backward on the nose piece. Be careful not to bend the nose piece as you do this - apply the pressure as close as possible to the frame by sliding your thumb upward. At the same time, pull down on the lens to release it.

Lens Insertion

First, seat both corners of the lens securely into the frame, while making sure that the center of the frame is also positioned behind the front side of the frame. Next, push upward in the center of the lens to secure the locking pin through the hole in the lens.

Instructional Video

In the video below, we demonstrate removing a lens and then installing a new lens. If you have any questions please contact customer service for help!